Product Categories
Contact Us

Tel:+86-755-29815831

Fax:+86-769-87934318

Mob:+86-13808833785

E-mail: info@rx-si.com

Add: Room 804, 8F, Tian Fuxing building, Liu Xian road, Minzhi, longhua district, Shenzhen City, Guangdong Province

News

Cured Silicone Rubber Is Used More Widely

Curing silicone rubber is used in a wide range of applications, including the following: electronic components, instrumentation, optics, refrigerators, air conditioners, freezers, automotive accessories, leak-proof oil leak sealing; for sealing and Small components of the bonding; for small electronic components of the potting and coating and so on.

Components for general cleaning treatment, the adhesive bonding room temperature curing 12 to 14 hours, the thickness of the adhesive layer and the area is a long curing time, Condensation Cure Silicone Rubber temperature components can be cured at room temperature after about 50 ℃ bake 4 to 12 hours The better the effect of room temperature, the longer the longer the better the bonding effect, with the need to tighten the hose, can be maintained next time, valid for one year.

Curing silicone rubber, also known as temperature vulcanized silicone rubber, is one of the main products of condensed silicone rubber. According to the vulcanization of the release of by-products of different, divided into acetic acid type, ketoxime type, alcohol type, Condensation Cure Silicone Rubber amine type, amide type and acetone type six. From the base of plastic, fillers, crosslinking agents, catalysts, plasticizers, pigments and other cooperation.

Products with flame retardant, a single component, room temperature curing, high temperature, environmental protection and other advantages. Is the power adapter, charger and switching power supply and other components of all products, bonding, fixing, insulation, sealing the best choice, reduce costs and improve efficiency.

Product Features

Fast curing: the product dry time is short (≤ 10min), deep curing fast, is conducive to fast bonding. After curing the adhesive layer is elastomer; after the release of alcohol substances, the vast majority of metal corrosion; excellent extrusion, Condensation Cure Silicone Rubber suitable for machine dispensing. Small molecular content of less than 300ppm; excellent weather resistance, moisture resistance, heat resistance; good electrical insulation properties. Excellent bonding properties, for most metals and plastics, ceramics and glass have good adhesion. Excellent flame retardant performance, through the UL94 V0 certification (UL FileNo.E343835); fully comply with the EU ROHS directive requirements.

Instructions for use: Condensation Cure Silicone Rubber the surface of the object will be cleaned and dried.  squeeze the glue with a special tool, coated on the clean side of the face.  usually at room temperature and relative humidity of 30% -80% under the conditions of curing, in 24-72 hours curing the physical properties of up to 90% of full performance. Condensation Cure Silicone Rubber The product is not suitable for highly sealed or deep curing.

Note: Please refer to MSDS for details before use. The construction site must maintain good air flow. Wear protective equipment, such as eye protection, special gloves, shoes and so on. Avoid contact with skin and eyes, if inadvertently touch the skin with a dry towel to wipe clean and wash with soap; if inadvertently touch the eyes, immediately rinse with water, if necessary, to the hospital. Condensation Cure Silicone Rubber This product should be sealed after use, can be saved again. This product is for industrial use only.

Product packaging: This product is plastic tube packaging, its specifications are: 300ml / support, 2600ml / support, but also users can also need to specify the specifications of the packaging.